Tyvek
/ Tyvek® 400
Model TY351S WH
Tyvek® 400
DuPont™ Tyvek®400, model TY351S WH. Pants. Elastication at waist. Stitched internal seams. No pockets. White.
DUPONT™ SAFESPEC™ Terms of Use
Product Selector Agreement
The following information must be read and accepted by the user before proceeding.
The DuPont™ SafeSPEC™ Product Selector Tool (“Tool”) is intended to assist in choosing protective clothing styles for particular applications and does not replace the judgment of a qualified safety professional or industrial hygienist. Additional personal protective equipment (“PPE”), such as but not limited to: respiratory, eye, head, foot, and hand protection, may be required. Supplying the proper hazard/chemical and exposure information for your hazard scenario is critical in order to obtain suggestions of possible garment options for your consideration. Inaccurate information could result in improper suggestions. Since there are other factors involved which could affect the final PPE decision and may not be considered in this Tool, the final decision on protective clothing selection is the responsibility of the buyer, safety professional, industrial hygienist and end-user. DuPont de Nemours, Inc. or its affiliates DISCLAIM ANY RESPONSIBILITY OR LIABILITY FOR ANY INFORMATION OR SUGGESTIONS PROVIDED BY THE TOOL OR THE USE THEREOF.
WARNING / CAUTION
There are uses, environments and chemicals for which any garment will be unsuitable. It is the responsibility of the user to review available data and verify that the garment selected is appropriate for the intended use and meets all specified government and industry standards.
Search by :
1 Choose Hazards
1 Enter
Chemicals
2 View Permeation Data
2 View
Data
3 View Matching Products
3 View
Products
Step 1 of 3
You may enter from one to five chemicals or other hazards that may be present in your working environment. Our tool will find the best product match for the combined hazards. Enter a single chemical or hazard if you wish to find the best possible product match for that one hazard.
Chemical or Other Hazard Name
or
CAS Number
| Chemical Details | CAS | Actions |
|---|
Hazard Concentration information
Please read following
- You have selected a chemical that has been tested at multiple concentrations. All concentrations will be displayed on the next page so that you can review breakthrough times for each concentration.
- Please review FAQs if your hazard concentration is lower or higher than the tested concentrations
Need Help?
- If you see your CAS number in the drop down list, make sure you are selecting the hazard from the drop down list before clicking "Add to List".
- If you do not see your CAS number listed, check the number and try again or you may want to try Guide.
1 Choose Hazards
1 Enter
Chemicals
2 View Permeation Data
2 View
Data
3 View Matching Products
3 View
Products
Step 2 of 3
CHEMICAL COMPARISON
The table below shows the Normalized Breakthrough times of fabrics for the hazards selected. (Testing Details) You can find specific garments that protect against these hazards by clicking the 'Next' button below.
Done
Done
Done
TYVEK
|
TYCHEM
|
GLOVES
|
||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 Choose Hazards
1 Enter
Chemicals
2 View Permeation Data
2 View
Data
3 View Matching Products
3 View
Products
Step 3 of 3
Flammable Environments
WARNING
If any of the following apply:
- A fire or electric arc is actively present in the work environment
- The work environment contains an uncontrollable flammable material between the Lower Explosive Limit (LEL) or Lower Flammable Limit (LFL) and the Upper Explosive Limit (UEL) or Upper Flammable Limit (UFL)
- The work environment has been subject to a breach or loss in containment of flammable material (flammable liquids, flammable vapors or combustible dusts)
- There is an uncontrolled fuel source available in the work environment (that may or may not have encountered an ignition source yet)
Please consider fire fighter PPE (personal protective equipment). Read more.
If none of these conditions apply but FR clothing is required in your working environment, close this box and proceed to the next question. Only fabrics that provide both chemical resistance to the hazards you have listed and protection during escape from a flash fire will be considered for your hazard scenario.
1 Choose Hazards
1 Enter
Chemicals
2 View Permeation Data
2 View
Data
3 View Matching Products
3 View
Products
step3of3
Is Suitable For Hazard Scenario
Is Not Suitable For Hazard Scenario
| Hazard | Fabric/Materials | Seam | Design |
|---|
Compare All
YOU MAY WANT TO CONSIDER SIMILAR PRODUCTS RELATED TO Model TY351S WH
Matching Products (0)
Your hazard scenario did not produce any results. May we suggest:
- If you are searching multiple hazards at one time, try breaking your search into separate hazards by either creating a new scenario or unchecking Hazards in the pane to the left. SafeSPEC™ is trying to find one garment that can be used for all of your hazards. You may need to consider more than one garment.
- If you have a liquid or vapor chemical hazard, try searching the Chemical Resistance Database. This database will show you permeation data for all of the fabrics tested against a given hazard. Once you are able to determine a suitable fabric, you will have the flexibility of selecting a suitable garment design and seam construction yourself.
- If you answered "yes" to the question that you are working in an environment that requires flame resistant clothing, please note that although DuPont has several garment options for scenarios involving possible industrial fire or electric arc exposures as well as chemical exposure hazards, these garments may not have been tested against the specific chemical hazard(s) that you have selected or may have breakthrough times lower than your intended work duration. If possible, try to mitigate the need for flame resistant clothing by implementing engineering controls, work practices and administrative controls before resorting to protective clothing. Additionally, try breaking your search into separate hazards as suggested above in order to find garment options to meet your needs.
- If you selected "localized to the feet" for the direction of exposure question, you may want to consider chemical resistant boots instead of purchasing a full garment. DuPont does not manufacture or sell chemical resistant boots. However, we do offer some coveralls and encapsulated suits with attached socks. These socks can be worn as an extra layer of protection inside of chemical resistant boots.
If you still need help, please Contact Us.
Is Suitable For Hazard Scenario
Is Not Suitable For Hazard Scenario
| Hazard | Fabric/Materials | Seam | Design |
|---|
Hover over image to zoom
CATIII
| Name | Description |
|---|---|
| Full Part Number | TYPT30SWHA0; TYPT31SWHA0 |
| Fabric/Materials | Tyvek® 400 |
| Design | Trousers with elasticated waist |
| Seam | Stitched (internal) |
| Color | White |
| Sizes | MD, LG, XL, 2XL |
| Quantity/Box | 50 per box, individually packed |
Technical Data Sheet
Related Products
Tyvek® 400
DuPont™ Tyvek® 400, model TY671S WH. Jacket with hood. Stitched internal seams. Dolman Sleeves. Zip. White.
.jpg)
Tyvek® 400
DuPont™ Tyvek® 400, model TY198S WH. Hooded coverall. Stitched external seams. Elastication at wrists, ankles and face. Elastication at waist (glued-in). Tyvek® zipper and flap. White.
FEATURES & PRODUCT DETAILS
DuPont™ Tyvek® 400, model TY351S WH. Pants available in white and in sizes MD to 2XL. Stitched internal seams. Without pockets. Elasticated waist and ankles.
Specially designed for use with Tyvek® apparel, Tyvek® accessories can help offer enhanced protection for body parts that are more exposed to hazardous substances.
Tyvek® garments and accessories are composed of flash spun high density polyethylene, providing an ideal balance of protection, durability and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 micron in size), is ultra-low-linting and antistatically treated. Silicon non-added.
Applications for Tyvek® 400 accessories include pharmaceutical handling, chemical protection, lead and asbestos abatement/remediation, general maintenance/operations, spray painting and general clean-up, amongst many others.
- Pants without pockets
- Antistatic treatment (EN 1149-1) - on inside; see footnotes
ADDITIONAL EQUIPMENT NEEDED
SIZES
Fabric & Permeation/Penetration Data
Physical Properties
Data relating to mechanical performance of the fabrics used in DuPont chemical protective clothing, listed for the selected garment according to the test methods and relevant European standard, if applicable. Such properties, including abrasion and flex-cracking resistance, tensile strength and pun
| Property | Test Method | Typical Result |
|---|---|---|
| Thickness | DIN EN ISO 534 | 140 µm |
| Surface Resistance at RH 25%, outside 7 | EN 1149-1 | ≤ 2,5x109 Ohm |
| Exposure to low Temperature | N/A. | Flexibility retained down to -73°C |
| Tensile Strength (MD) | DIN EN ISO 13934-1 | >30 N |
| Trapezoidal Tear Resistance (MD) | EN ISO 9073-4 | >10 N |
| Exposure to high Temperature | N/A. | Melting point ˜135 °C |
| Basis Weight | DIN EN ISO 536 | 41.5 g/m2 |
| Colour | N/A. | White |
| Flex Cracking Resistance 7 | EN ISO 7854 Method B | >100000 cycles |
| Abrasion Resistance 7 | EN 530 Method 2 | >100 cycles |
| Puncture Resistance | EN 863 | >5 N |
| Tensile Strength (XD) | DIN EN ISO 13934-1 | >30 N |
| Trapezoidal Tear Resistance (XD) | EN ISO 9073-4 | >10 N |
| Surface Resistance at RH 25%, inside 7 | EN 1149-1 | ≤ 2,5x109 Ohm |
| Thickness | DIN EN ISO 534 | 140 µm |
| Surface Resistance at RH 25%, outside 7 | EN 1149-1 | ≤ 2,5x109 Ohm |
| Exposure to low Temperature | N/A. | Flexibility retained down to -73°C |
| Tensile Strength (MD) | DIN EN ISO 13934-1 | >30 N |
| Trapezoidal Tear Resistance (MD) | EN ISO 9073-4 | >10 N |
| Exposure to high Temperature | N/A. | Melting point ˜135 °C |
| Basis Weight | DIN EN ISO 536 | 41.5 g/m2 |
| Colour | N/A. | White |
| Flex Cracking Resistance 7 | EN ISO 7854 Method B | >100000 cycles |
| Abrasion Resistance 7 | EN 530 Method 2 | >100 cycles |
| Puncture Resistance | EN 863 | >5 N |
| Tensile Strength (XD) | DIN EN ISO 13934-1 | >30 N |
| Trapezoidal Tear Resistance (XD) | EN ISO 9073-4 | >10 N |
| Surface Resistance at RH 25%, inside 7 | EN 1149-1 | ≤ 2,5x109 Ohm |
- According to EN 14325
- According to EN 14126
- According to EN 1073-2
- According to EN ISO 14116
- According to EN ISO 11612
- Front Tyvek ® / Back
- See Instructions for Use for further information, limitations and warnings
- Larger than
- Smaller than
- Smaller than or equal to
- Not Applicable
- Standard Deviation
GARMENT PERFORMANCE
WARNING
SPECIAL WARNINGS
COMFORT
PENETRATION AND REPELLENCY
✕
✕
To access secured content from DuPont Please Sign In or Sign Up below